Apartment turnover painting and make-ready in Utah, scoped by the unit.
When move-outs stack up, we take the patch, paint and punch off your in-house team. Send a unit list and you get a written scope and price for each unit before any work starts.

- Utah contractor license
- B100 #12546496-5501
- Liability insurance
- $1M per occurrence, $2M aggregate, plus $2M umbrella and $1M commercial auto
- Workers' compensation
- Active, $1M employer's liability
- Quote turnaround
- 24 to 48 hours after the walk
A local finish crew for the weeks turns stack up
Your maintenance techs spend the month on resident work orders. Then the notices land together, and a stack of units needs walls, doors and trim finished before move-in.
That finish work is what we take. VASCO is a licensed general contractor in Lehi, and the crew that patches a wall also paints it.
We work alongside whatever you already have. Your in-house team keeps the mechanical work, your national vendor keeps its contract, and we close the units neither can reach that week.

Send the unit list. Get a scope and a price for each door.
Most communities run turns from a board, and we work from yours. Send the unit numbers and move-out dates. Each unit on the list gets its own written scope and its own price before work starts.
Start with one batch. If the units come back the way the scope says, send the next list.
- A scope written per unit, so a light turn is never priced like a heavy one
- Every price approved before the crew opens a can
- Status by unit number, so leasing knows which doors are rent-ready
What a per-unit scope covers
Every unit is written up against the same checklist, and you approve the lines you want.
- Walls. Nail holes, anchor holes and dents patched. Larger damage cut out, refinished and texture matched. Repairs primed, then touch-up or a full repaint to your color standard.
- Ceilings. Stains sealed and painted, cracks and popped fasteners repaired, texture matched wherever a patch was made.
- Doors and trim. Doors adjusted to latch and clear. Damaged baseboard and casing repaired or replaced. Doors and trim painted.
- Caulk. Failed caulk cut out and replaced at tubs, counters, windows and trim.
- Hardware. Hinges, strikes, door stops, closet rods, towel bars and cabinet pulls tightened or replaced.
- Blinds. Bent or broken blinds taken down and replaced with the size and style your community stocks.
- Light punch items. Closet shelves refastened, loose transition strips secured, and the other small items from your move-out inspection.

What stays outside the scope
A turn has more trades in it than paint. Our crew does not perform the four below, and each has a plan so the unit still closes.
| Item | Who does it | How we handle it |
|---|---|---|
| Cleaning | Your cleaning vendor or staff | Excluded unless coordinated ahead of time. We remove our own materials and debris and leave the unit ready for your cleaners. |
| Carpet replacement | Your flooring vendor | Not in our scope. Give us the install date and we sequence paint ahead of the new carpet. |
| Appliance repair | Your appliance vendor or in-house techs | Not in our scope. We note what we see during the walk so your techs have a list. |
| Plumbing and electrical | Licensed trade partners | Our painters do not perform it. We flag the item, and on request it is performed by a licensed trade partner under our contract. |
Buildings built before 1978: lead-safe renovation rules can apply. Tell us the year the building was built and we will confirm how the job has to be handled before we price it.
How end-of-month batches are scheduled
Month-end is predictable, so we plan for it. Send the list when notices come in, with move-out dates and any move-ins already promised.
We walk the units as they empty, group them by building and floor, and give you an order of work by unit number. Units with a move-in date go first.
Before the batch starts we tell you how many units our crew can take that week. If your list is bigger than that, you hear it before leasing quotes a date.
- Keys, lockboxes and access arranged with the office before the first day
- A bilingual W-2 crew in VASCO shirts and a marked van, so residents know who is in the building
- A unit added or a scope changed gets a revised line in writing before work continues

Photo closeout for every unit
Each unit closes with the same packet, sent to the community manager, so you can see the unit without walking it.
Photos by room
After photos of every room we worked in, labeled with the unit number, plus before photos of the damage we repaired.
Scope lines marked closed
The approved scope for that unit with each line checked off, so you can compare what was quoted with what was done.
Items for your team
Anything we saw outside our scope, such as a ceiling stain that keeps returning or an appliance that does not run.
Invoice lines by unit
Each unit is billed on its own lines that match its quote, so accounting can code the cost to the door.
Common areas and leasing offices make a good first project
If your turn vendors are set for now, start us on something the whole community sees. Leasing offices, clubhouses, corridors and stairwells are repainted on the same line-by-line quote.
These spaces stay open, so we paint them on nights and weekends. We have worked after hours inside Fashion Place mall, where the landlord sets the hours.
One repaint shows you how we scope the work and what the finished walls look like. After that, the unit list is a small step.

From unit list to rent-ready
Send the unit list
Unit numbers, floor plans, move-out dates and your paint standard. Text it to (801) 692-7924 or paste it into the quote form.
We walk the units
We walk the units with your maintenance supervisor, photograph the damage and note your color and sheen standards.
Scope and price per unit
Within 24 to 48 hours of the walk you get a written scope for each unit, priced line by line. Approve units and lines one by one.
Schedule the batch
You get an order of work by unit number, built around your move-in dates and the access the office can give us.
Work, photos, punch
Each unit closes with its photo packet. Walk any unit with us, flag what you see, and we fix it before the batch is invoiced.
Related work
Drywall repair
Level 4 and 5 patches with matched texture, painted by the same crew so the repair does not flash.
Commercial painting
Patch and paint for offices, retail and warehouses, scheduled around the people in the building.
Maintenance plans
A crew in your building on a set Punch Day, working a list you keep, for a flat rate.
Provo
Student and multifamily unit turns in batches, plus painting and repairs for downtown Provo offices.
FAQ
Questions community managers ask first
What is included in an apartment unit turn?
Walls, ceilings, doors and trim, caulk, hardware, blinds and light punch items, written up as a scope for each unit. You approve the lines you want. Cleaning, carpet replacement and appliance repair are excluded unless we coordinate them ahead of time.
How fast can you turn a unit?
It depends on the condition of the unit and how many are in the batch, so we do not publish a turn time. After the walk you get an order of work by unit number. Our standard lead time is 3 to 4 business days.
How is a turn priced?
Each unit gets its own written scope and price before work starts. The price moves with the floor plan, the wall damage, color changes and whether ceilings, doors and trim are in the scope. The quote arrives within 24 to 48 hours of the walk.
Can you work alongside our national vendor or in-house maintenance team?
Yes. We take the units you assign to us and stay out of the rest. Your in-house team keeps work orders and mechanical items, and your contracted vendor keeps its units.
Do your painters handle plumbing or electrical items found during a turn?
No. We flag them in the closeout packet. If you want them handled under one contract, the work is performed by licensed trade partners that we hire, schedule and supervise.
What can you send so we can approve you as a vendor?
A certificate of insurance per property and ownership entity, with additional insured, waiver of subrogation, and primary and non-contributory endorsements. Our Utah B100 license number is 12546496-5501, which you can verify with the Utah Division of Professional Licensing. We also send a W-9. Coverage is general liability ($1M per occurrence, $2M aggregate), an umbrella policy, commercial auto and workers' compensation.
Our buildings were built before 1978. Does that change the job?
It can. Lead-safe renovation rules can apply to buildings built before 1978. Tell us the year the building was built and we will confirm how the job has to be handled before we price it.
Send the unit list. Start with one batch.
Text unit numbers and move-out dates to (801) 692-7924. After the walk you get a written scope and price for each unit within 24 to 48 hours.